Xerox WorkCentre 7335, Руководство системного администратора

Страница: 28 / 300

16
Configuring SNMP Community Names with Internet Services
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press
Enter .
2. Click the Properties Tab.
3. Click the plus symbol (+) to the left of the Connectivity , then the Protocols file folder.
4. Select SNMP Configuration in the directory tree, and check the Enable box for the version desired.
5. Click the Edit Properties button and supply the User Name (default of 11111) and Password (default
of x-admin), if prompted.
6. Enter a name for the Community Name (Read-Only) . This is the password for SNMP GET requests
from the SNMP Manager to the Agent in the Device.
7. Enter a name for the Community Name (Read-Write) . This is the password for SNMP SET requests
from the SNMP Manager to the Agent in the Device.
Caution: If you change the GET and/or SET Community Names, you must also change the names in
all network applications that are communicating by SNMP with this Device.
8. Enter a name for the Community Name (Trap Notification) . This is the default password for SNMP
TRAPS sent from the device to the Manager by SNMP.
9. Optionally enter the System Administrator's name for packet identification purposes.
10. Select a trap and click Edit in the Trap Notification Settings section.
11. Select your transport method (IPX or UDP) and fill in the trap destination information for your selected
method.
12. Select the event(s) that you wish to report on by checking the applicable box(es).
13. Click Apply to accept the changes, or Undo to return the settings to their previous values.
Note: Changes to settings will not be applied until you restart the Device.