Xerox Wide Format 6705 System, Руководство пользователя

Страница: 241 / 363

Authentication
7
241
7.6 Enabling Remote Authentication
Configuration on Authentication Management
The following gives an overview of how to configure Authentication Management.
Refer

For detailed instructions, refer to "ApeosWare Management Suite Administrator Guide for Identity Management
/ Common Settings / Device Management.
Steps
St
1.
Login to the ApeosWare Management Suite.
2.
Set up ApeosWare Management.
Refer to the following setup procedures:

Step 1 Setting device information to device groups ...............................................................................................................p. 241
 Step 2 Adding users ..............................................................................................................................................................................p. 241
 Step 3 Adding sub-users......................................................................................................................................................................p. 242
 Step 4 Adding users to a device group..........................................................................................................................................p. 242
 Step 5 Updating Devices ....................................................................................................................................................................p. 242
Step 1 Setting device information to device groups
Add Xerox Wide Format 6705 System to device groups by following the steps below.
(1)
From the menu, select [Management Service] > [Device/User] > [Device List].
(2)
On the [Device Group] portlet, click the desired device group.
(3)
Click [Add Device].
(4)
Select [Specify and add IP address/host name directly], and click [Next].
(5)
On the [Basic Information] tab, enter the IP address or host name of your Xerox Wide Format 6705
System in [IP Address/Host Name].
(6)
In [Device Name], enter the device name used within Device Management.
To enter the device name (for device settings), deselect the [Retrieve from Device] check box.
(7)
Set other items as necessary.
(8)
Click [Add].
Xerox Wide Format 6705 System is added to the device group.
Step 2 Adding users
Add users who will be remotely authenticated, by following the steps below.
(1)
From the menu, select [Management Service] > [Identity Management] > [Users/Groups].
(2)
On the [User Group] portlet, click [local].
(3)
Click [Add User].
(4)
On the [Basic Information] tab, fill in each of the following items: [User ID], [User Name], [Password],
and [Confirm Password].
(5)
Set other items as necessary.
(6)
Click [OK].
The user is added.