Xerox Telecopier 7017, Техническое справочное руководство

Страница: 91 / 194

ADJ 5.2 Scan Registration
(continued)
b. If the trail edge registration arrow
was cut off, select a bit setting from
Table 1 that is one position more
towards positive than your current
setting for each 0.5 mm that was cut
off.
c. If the lead edge registration arrow
was cut off, select a bit setting from
Table 1 that is one position more
towards negative than your current
setting for each 0.5 mm that was cut
off.
5. Adjust System Data Setup No. 10.
a. Select Menu 81. The display
indicates:
81 SYSTEM DATA SETUP
PRESS [START] OR [SCROLL]
b. Press the Start button. The display
indicates:
81 CAUTION: CHANGE WILL EFFECT OPERATION
PRESS [START] OR [STOP]
c. Press the Start button. The display
indicates:
81 SYSTEM DATA NUMBER>01 DATA 00000000
ENTER 2 DIGIT SYSTEM DATA NUMBER
NOTE: The display returns to Idle after 30
seconds. It is advisable to have the needed
information ready to input.
CAUTION
Do not arbitrarily change System Data
Parameters. To do so may violate CCITT
Standards and cause improper Terminal
operations.
d. Enter the System Data Setup No: 10.
e. Press Enter.
Continued
Table 1
System Data: 10
Bit No.
Bit Definition
0 1
7
0
1
2
3
4
5
6
3210 3210 3210
0000: -4.0 0110: -1.0 1100: +2.0
0001: -3.5 0111: -0.5 1101: +2.5
0010: -3.0 1000: ±0 1110: +3.0
0011: -2.5 1001: +0.5 1111: +3.5
0100: -2.0 1010: +1.0
0101:-.5 1011: +1.5
Default
USO RX
0 0
0 0
1 1
0 0
0 0
0 0
1 1
0 0
7654 7654 7654
0000: -4.0 0110: -1.0 1100: +2.0
0001: -3.5 0111: -0.5 1101: +2.5
0010: -3.0 1000: ±0 1110: +3.0
0011: -2.5 1001: +0.5 1111: +3.5
0100: -2.0 1010: +1.0
0101:-1.5 1011: +1.5
Description
Scan registration
(mm)
Cutter registration
(mm)
12/88
ADJ 5.2
4-54 Telecopier 7017 / 7017SF
www.printcopy.info
www.printcopy.info