Xerox Telecopier 7017, Техническое справочное руководство

Страница: 8 / 194

1.3 Additional System Checks
1.3.1 G2 On-Line Check
NOTE: Perform this check only after 1.2.2 Off-
Line System Check and 1.2.3 On-Line System
Check have been performed. Transmit and
receive to/from a known good terminal
capable of G2 operation.
NOTE: If an error code (COXX, FPXX, EXXX, or
OPXX) appears at any time during this check,
do not continue. Refer to Section 2 for the
Error Code List and perform the actions
indicated.
1. Ensure power has been on for 15 seconds,
then enter service mode.
2. Press Menu.
3. Press 9 then 3 on the key pad.
4. Press Start.
5. Display indicates:
93 COMMUNICATIONS MODE >XXX
PRESS [START] OR [SCROLL]
6. Note which communications mode
customer has selected (AUTO, G3STD, or
G2).
7. If G2 not selected, select G2 by pressing
Select until display indicates:
93 COMMUNICATIONS MODE >G2
PRESS [START] OR [SCROLL]
8. Press Enter.
9. Perform a transmit operation and then a
receive operation. Terminal transmits
and receives normally for CCITT G2.
Y
N
| Replace A5, A2,
10. Press Menu.
11. Press 9 then 3 on the key pad.
12. Press Start.
13. Press Select until display indicates
communications mode customer had
selected (AUTO, G3STD, or G2) as noted
in Step 9.
14. Return to procedure which directed you
to this check or go to Final Actions.
1.3.2 Store and Forward Check
NOTE: Perform this check only after 1.2.2 Off-
Line System Check and 1.2.3 On-Line System
Check have been performed.
NOTE: If an error code (COXX, FPXX, EXXX, or
OPXX) appears at any time during this check,
do not continue. Refer to Section 2. for the
Error Code List and perform the actions
indicated.
1. Visually check that store and forward
A8 PWB is installed.
2. Ensure power has been on for 15
seconds, then enter service mode.
3. Press Menu.
4. Press 1 then 8 on key pad. Display
indicates:
18 CONFIDENTIAL SEND >OFF
PRESS [SELECT] TO CHANGE THEN [ENTER]
Y N
| Replace A8, A2.
5. Exit service mode.
6. Ask customer to perform store and
forward operation.
7. Store and forward completes normally.
Y N
| Replace A8, A2.
8. Return to procedure which directed you
to this check or go to Final Actions.
12/88
G2 On-Line, Store & Forward Checks
1-6 Telecopier 7017 / 7017SF
www.printcopy.info
www.printcopy.info