Xerox Telecopier 7017, Техническое справочное руководство

Страница: 87 / 194

ADJ 5.1 Cutter Registration
(continued)
b. If more than 5 lines were printed on
the top of the test patterns, select a
bit setting from Table 1 that is two
positions more towards positive than
your current setting for each extra
line that was printed.
c. If more than 2 mm of white is printed
at the bottom of the test pattern,
select a bit setting from Table 1 that
is one position more towards
negative than your current setting
for each extra 0.5 mm of white.
5. Adjust System Data Setup No. 10.
a. Select Menu 81. The display
indicates:
81 SYSTEM DATA SETUP
PRESS [START] OR [SCROLL]
b. Press the Start button. The display
indicates:
81 CAUTION: CHANGE WILL EFFECT OPERATION
PRESS [START] OR [STOP]
c. Press the Start button. The display
indicates:
81 SYSTEM DATA NUMBER>01 DATA 00000000
ENTER 2 DIGIT SYSTEM DATA NUMBER
NOTE: The display returns to Idle after 30
seconds. It is advisable to have the needed
information ready to input.
CAUTION
Do not arbitrarily change System Data
Parameters. To do so may violate CCITT
Standards and cause improper Terminal
operations.
d. Enter the System Data Setup No: 10.
e. Press Enter.
Continued
Table 1
System Data: 10
Bit No.
Bit Definition
0 1
7
0
1
2
3
4
5
6
3210 3210 3210
0000: -4.0 0110: -1.0 1100: +2.0
0001: -3.5 0111: -0.5 1101: +2.5
0010: -3.0 1000: ±0 1110: +3.0
0011: -2.5 1001: +0.5 1111: +3.5
0100: -2.0 1010: +1.0
0101:-.5 1011: +1.5
Default
USO RX
0 0
0 0
1 1
0 0
0 0
0 0
1 1
0 0
7654 7654 7654
0000: -4.0 0110: -1.0 1100: +2.0
0001: -3.5 0111: -0.5 1101: +2.5
0010: -3.0 1000: ±0 1110: +3.0
0011: -2.5 1001: +0.5 1111: +3.5
0100: -2.0 1010: +1.0
0101:-1.5 1011: +1.5
Description
Scan registration
(mm)
Cutter registration
(mm)
12/88
ADJ 5.1
4-50 Telecopier 7017 / 7017SF
www.printcopy.info
www.printcopy.info