Xerox Telecopier 7017, Техническое справочное руководство

Страница: 155 / 194

Change Tag/MOD Index
The Tag/MOD matrix is located inside the right
side frame. All important modifications to the
terminal that are installed in the factory or in
the field, are identified by a number marked
on this matrix. The appropriate Tag/MOD
number should be marked off or removed
from the matrix whenever a Tag/MOD is
installed. Determine the Tag/MOD level of the
terminal by the Tag/MOD matrix located
inside of the terminal.
Refer to the Tag classification for information
as to when to use the tag. Read the
description to determine how the terminal will
benefit from the Tag/MOD. Refer to the kit
number to order the modification kit. Refer to
the bulletin number for additional tag
information.
Refer to the Factory and field install serial
numbers to determine which Tag/MOD(s)
were installed at the factory and which were
be installed in the field. The manual is revised
to include the latest machine changes listed in
Table 1 Factory/Field Change Tag/MOD Index.
USO: Tag/MOD Classification
Classification of Tag/MOD (s) are identified
below by a letter (M, R, O, or N). The list below
defines the degree of importance assigned to
each letter:
M Mandatory
R Install at time of repair
O Optional
N Not for field retrofit. Factory retrofit
only.
RX: Tag/MOD Classification
Classification of the Tag/MOD is identified
below by a Class number. The list below
defines the degree of importance assigned to
each Class number:
Class 1 Safety Tag/MOD which must be made
in the field immediately; parts are
available.
Class 2 Tag/MOD made in the field,
retroactive on all machines, on next
service call.
Class 3 Repair by replacement Tag/MOD.
Class 4 Tag/MOD incorporated at discretion
of local management or to
customer’s requirements.
Class 5 Production only.
Table 1 Change Tag/MOD Index
Tag/MOD and
Classification
Description
Kit and
Bulletin Numbers
Factory Install
(Listed Serial
Number and
above)
Field Install
(Listed Serial
Number and
below)
1
R
Thermal head bracket and lower feed out roller changed to correct
for printing and feeding problems. (USO) 499K95724
(RX) 499K95725
(USO) 49K011140
(RX) 59T548734
(XC) 49K060000
(OLV) 57U200001
(USO) 49K011139
(RX) 59T548733
(XC) 49K059999
(OLV) 57U200000
2
R
A2 main PWB changed to level 13. Confidential Send default is on
and sending of partial batch is permitted. Corrects for incorrect
display when setting up contrast. 140K87879 (USO) 49K013412
(RX) 59T551374
(XC) 49K060660
(OLV) 57U200001
(USO) 49K013411
(RX) 59T551373
(XC) 49K060659
(OLV) 57U200000
3
R
Printer assembly bearing cams changed to eliminate shaft end
play. 499K95753 (USO) 49K015272
(RX) 59T554494
(XC) 49K060900
(OLV) 57U200001
(USO) 49K015271
(RX) 59T554493
(XC) 49K060899
(OLV) 57U200000
4
R
Cutter arm change adds spring to correct cutting problem with RX
B4 thermal head. (USO) 31E95701
(RX) 499K95853
(USO) 49K017432
(RX) 59T559474
(XC) 49K062220
(OLV) 57U200421
(USO) 49K017431
(RX) 59T559473
(XC) 49K062219
(OLV) 57U200420
12/88
Telecopier 7017 / 7017SF 6-39
Change Tag/MOD Index
www.printcopy.info
www.printcopy.info