Xerox Telecopier 7017, Техническое справочное руководство

Страница: 9 / 194

1.3.3 Automatic Document Feeder
Check
NOTE: Perform this check only after 1.2.2 Off-
Line System Check and 1.2.3 On-Line System
Check have been performed.
NOTE: If an error code (CXXX, FPXX, EXXX, or
OPXX) appears at any time during this check,
do not continue. Refer to Section 2 for the
Error Code List and perform the actions
indicated.
1. Enter Service Mode.
2. Place at least three sheets of paper
(multiple originals) into input tray.
3. Enter Original Feed Test.
a. Press Menu.
b. On the key pad, press 7 then 2. The
display indicates:
72 ORIGINAL FEED
PRESS [START] OR [SCROLL]
4. Press Start.
5. Originals feed one sheet at a time.
Y N
| RAP 2.3.10.
6. Press Stop to end test.
7. Go to Final Actions.
1.4 Final Action
1.4.1 Call Completion
1. Clean the platen glass.
a. Open and secure the upper scan
cover.
b. Moisten a soft, lint-free cloth or
paper towel with Xerox Lens and
Mirror Cleaner and clean the platen
glass.
2. Cheat upper scan cover interlock switch.
3. Enter Service Mode.
NOTE: Use Xerox CLEAN-UPS to perform the
following cleaning functions (it may be
necessary to use several CLEAN-UPS).
4. Enter the Scan Motor Test.
a. Press Menu.
b. On the key pad, press 7 then 4.
c. Press Start. (Scan motor operates.)
d. Hold the CLEAN-UP against the ADF
belt. Apply enough pressure to clean
the ADF belt but not stall the scan
motor.
5. Clean the ADF belt.
6. Press Stop to end test.
7. Clean the following:
a. Clean the retard pad.
b. Clean the lower scan drive rollers.
c. Clean the platen roller.
d. Clean the upper scan idler rollers.
8. Clean the pressure roller.
a. Open printer.
b. Clean the exposed area of the
pressure roller and rotate the roller
clockwise to clean the complete roller
surface.
9. Make a Service Options Report for future
reference.
a. Press Menu.
b. On the key pad, press 2 then 2.
c. Press Start.
10. Refer to Service Options Report printed
during Prepare For System Check (if
available) and ensure present
configuration agrees with original
customer configuration.
11. Fold as necessary and place the Service
Options Report behind the Operator
Guide in the output tray.
NOTE: The Service Options Report is retained
as a record of the system data configuration
and all option settings configured by the
Customer. This is useful in case such
information is lost due to Main A2 PWB
replacement or inadvertent erasure.
12. Perform System Check to verify
operation.
13. Replace and clean all covers removed
during the service call.
14. Complete all required administrative
tasks.
12/88
Telecopier 7017 / 7017SF 1-7
ADF Check, Call Completion
www.printcopy.info
www.printcopy.info