Xerox Telecopier 7017, Техническое справочное руководство

Страница: 26 / 194

RAP 2.3.11 Belt Checkout.
NOTE: The following check applies to all belts.
1. Remove covers and parts as necessary to
access the belt. (Refer to Section 4 and
Section 5.)
2. Inspect the belt. Belt is in good condition
(not broken, frayed and does not have
surface cracks).
Y
N
| Replace belt.
3. Return to procedure which directed you
to this test or go to Final Actions.
RAP 2.3.12 Both LEDs remain on.
1. The display indicates:
DIAL TELEPHONE NUMBER OR
WHEN READY - PRESS [MANUAL RCV]
Y N
| Replace A2, power supply
assembly.
2. Lift handset from handset cradle. Press
switch on handset. Handset is silent (no
dial tone).
Y
N
| Replace handset.
3. Replace A2, A10.
RAP 2.3.13 Received Image Quality is
Unacceptable.
NOTE: This procedure applies to image quality
problems either:
• Received at the local terminal and sent by a
remote terminal, or
• Received at a remote terminal and sent by
the local terminal.
1. Replace A10. Problem resolved.
Y N
| Go to Step 3.
2. Go to Final Actions.
3. Replace A2. Problem resolved.
Y N
| Go to Step 5.
4. Go to Final Actions.
5. Call the Facsimile Technical Support
Center (TSC). Request to receive (not in
Error Correct mode) from their terminal.
Image quality is acceptable. (Refer to
Section 3 for image quality.)
Y
N
| Inform Customer of telephone line
problem.
6. Go to Final Actions.
8/88
RAPS 2.3.11, 2.3.12
2-16 Telecopier 7017 / 7017SF
www.printcopy.info
www.printcopy.info