![background image](http://html2.mh-extra.com/html/xerox/phaser-7300b/phaser-7300b_study-manual_4230986031.webp)
PHASER 7300 CARE WORKSHEET
0
page 27
When a new supply is installed into the printer, the count for that Customer Replaceable
Consumable, or CRC, is reset to zero. After the new CRC is installed, the printer blows the CRC
fuse. If a used consumable is installed, the printer detects the blown fuse. Because the fuse is
already blown, the CRC count will not be reset to zero for the used supply.
When installing a used CRC, use the hidden Reset menu to individually reset the count to zero.
Check CRC Status
In this exercise, you will check the status of the consumables.
1.
Determine consumables status:
■
At the Front Panel, select
Printable Pages Menu
, then press
OK
.
■
Scroll to
Print Supplies Page
, then press
OK
. The
Supplies Usage Page
is generated.
■
Use the page to locate and record the following information:
■
Press the
Back
key to return to the main menu.
2.
Locate and record the total print count:
■
Select
Menus
, then press
OK
.
■
Scroll to
Supplies Info Menu
, then press
OK
.
■
Scroll to
Total Print Count
, then press
OK
.
■
Record the value _________________________________.
■
Press the
Back
key to return to the main menu.
If the Front Panel has an error message indicating it is time to replace a
consumable, and a used consumable is installed, the error message will
remain on the display until the CRC count is reset.
Consumable
Date Installed
Pages/Life Remaining
Toner Cartridges: Black
Toner Cartridges: Magenta
Toner Cartridges: Cyan
Toner Cartridges: Yellow
Imaging Units: Black
Imaging Units: Magenta
Imaging Units: Cyan
Imaging Units: Yellow
Fuser
Transfer Unit
Содержание Phaser 7300B
Страница 2: ......
Страница 24: ...page 20 PHASER 7300 SETUP WORKSHEET version 1 0...
Страница 44: ...page 40 PHASER 7300 CARE WORKSHEET 0...
Страница 68: ...page 64 PHASER 7300 Troubleshooting Flowcharts 0...