Xerox Phaser 7300B, Руководство по изучению

Страница: 16 / 68

page 12
PHASER 7300 SETUP WORKSHEET
version 1.0
Install Toner Cartridges
In this exercise, you will install the four Toner Cartridges.
The printer ships with four standard capacity Toner Cartridges. Be sure to shake each
cartridge to loosen the toner, which may become packed during shipment or storage.
Before installing the Toner Cartridges, the plastic retainers must be removed from the Imaging
Units. Install the Toner Cartridges immediately after removing the retainers to reduce the amount
of time the Imaging Units are exposed to light.
Install the four Toner Cartridges.
Please refer to steps 8 through 10 of the Phaser 7300 Color Printer Setup
Poster to complete this exercise.
To reduce the exposure of the light sensitive Imaging Units, unpack all of
the Toner Cartridges and remove the protective strip from each before
opening the top cover.
To avoid damage to the Imaging Units, do not expose them to light for more
than 10 minutes. Too much exposure will cause print quality problems and
reduce the life of the Imaging Units. Keep the printer’s top cover closed until
all four Toner Cartridges are ready to install.
Severe print quality problems may result if toner leaks from the Toner
Cartridges. Be sure to lock them down properly.
Remove all of the protective sheets from the Imaging Units. Failure to
remove all of the protective sheets may result in damage to the Imaging
Units and to the printer.