Xerox Phaser 5335 Скачать руководство пользователя страница 34

Страница: 34 / 230

1 Printer Environment Settings

1.6

Installing a Print Driver

To print from your computer, install a print driver. Drivers are available for:

• Windows:

PCL (use the Software CD-ROM )
PostScript (use the “Installing a Windows PostScript Driver” installation instructions

below.)

• Macintosh:

PostScript (use the Windows installation instructions in the ‘Printing Guide.’)

• Linux:

PostScript (use the Windows installation instructions in the ‘Printing Guide.’)

The installation procedure varies depending on how your computer is connected to the

printer and the operating system installed on your computer.
For installation instructions, refer to the Documentation CD-ROM.

• Refer to the Documentation CD-ROM for instructions when installing other software.

Installing a Windows PostScript Driver

There are two CD-ROMs delivered with your printer:
• Software CD-ROM - This CD-ROM contains all the print drivers available for the printer.
• Documentation CD-ROM - This CD-ROM contains all the documentation for the printer.

About the Software

This section describes the software for Windows NT 4.0, 2000, Windows XP, Windows

Server 2003, and Windows Vista included on the Software CD-ROM.

Included Software

The following items are included on the Software CD-ROM and are required to print

PostScript documents from Windows NT 4.0, 2000, Windows XP, Windows Server 2003, or

Windows Vista.
•

PPD files and print driver

- The PPD files and PostScript print driver (which has added

Xerox unique features to Microsoft PScript 5.0) for Windows NT 4.0, 2000, Windows XP,

Windows Server 2003, and Windows Vista.

•

Readme.txt

- Describes the precautions that must be followed when using the print

driver. Be sure to read this before using the print driver.

Hardware/Software Requirements

The system requirements for the print driver for Windows NT 4.0, 2000, Windows XP,

Windows Server 2003, or Windows Vista are as follows:

Computer System

Personal computer on which the Windows NT 4.0, 2000, Windows XP, Windows Server

2003, or Windows Vista is installed.

Содержание Phaser 5335







































































































































































































































Результаты поиска

Содержание Phaser 5335

Отзывы:

Похожие инструкции для Phaser 5335

Бренды по названию

Популярные бренды

Xerox Phaser 5335, Руководство пользователя

Результаты поиска

Содержание Phaser 5335

Отзывы:

Похожие инструкции для Phaser 5335

Бренды по названию

Популярные бренды