manualshive.com logo in svg

Xerox Phaser 5335, Руководство пользователя

Поделиться
Скачать
Xerox Phaser 5335 Скачать руководство пользователя страница 10

x

 Before Using the Machine

Safety Notes

Read these safety notes carefully before using this product to make sure you operate 

the equipment safely.
Your Xerox product and recommended supplies have been designed and tested to 

meet strict safety requirements. These include safety agency approval, and 

compliance to established environmental standards. Please read the following 

instructions carefully before operating the product and refer to them as needed to 

ensure the continued safe operation of your product.
The safety and environment testing and performance of this product have been verified 

using Xerox materials only.

WARNING: Any unauthorized alteration, which may include the addition of new 
functions or connection of external devices, may impact the product 
certification. Please contact your authorized Service Provider for more 
information.

Warning Markings

All warning instructions marked on or supplied with the product should be followed.

Maintenance Information

1.

Any operator product maintenance procedures will be described in the customer 

documentation supplied with the product. 

2.

Do not carry out any maintenance procedures on this product which are not 

described in the customer documentation.

3.

WARNING:

 Do not use aerosol cleaners. Aerosol cleaners can be explosive or 

flammable when used on electromechanical equipment.

4.

Use supplies and cleaning materials only as directed in the Operator section of 

this manual.

5.

Do not remove covers or guards that are fastened with screws. There are no parts 

behind these covers that you can maintain or service.

WARNING

This WARNING alerts users to areas of the product where there is 

the possibility of personal injury.

WARNING

This WARNING alerts users to areas of the product where there 

are heated surfaces, which should not be touched.

WARNING

This symbol indicates a Laser is being used in the equipment and 

alerts the user to refer to the appropriate safety information

WARNING This product must be connected to a protective earthing 

circuit.

Содержание Phaser 5335







































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды