Xerox Nuvera 100, Руководство оператора

Страница: 45 / 234

Operator Guide 1-25
Overview
Feeder/stacker modules
The feeder/stacker modules contain the high-capacity feeder
trays and the stacker bins. The printer may have up to four
feeder/stacker modules (including the inverter feeder/stacker),
containing feeder trays 3, 4, 5, and 6, and stacker bins A, B, C,
and D. Each module contains one high-capacity feeder tray and
one high capacity stacker bin.
High-capacity
feeders
The high-capacity feeder (HCF) trays are located in the bottom
half of the feeder/stacker modules. Each HCF tray can hold up to
2500 sheets of 20 pound or 80 gsm paper.
The high-capacity feeder trays can handle paper sized from 8 by
10 inches / 203 by 254 mm to 17 by 14.02 inches / 432 by 356
mm.
Unlike the processor feeder trays, the HCF trays have Paper
Level switches, which detect the position of the elevator to
determine the fullness of the tray.
High-capacity
stackers
The high-capacity stacker (HCS) bins are located in the top half
of the feeder/stacker modules, accessed through double doors.
Two high-capacity stacker bins are standard, with up to two
additional bins available as options (providing up to four bins
total). Each bin holds up to 2500 sheets of 20 pound or 80 gsm
paper.
Inverter The inverter is part of the inverter feeder/stacker module. It
allows for proper collation of the print job. It also directs printed
output to the sample tray, when required.