Xerox Nuvera 100, Руководство оператора

Страница: 205 / 234

Operator Guide Glossary-13
half bitting A control that simulates a partial change in position of a pixel by
printing every other pixel and allowing the printer to smooth out
the ripples. The effect is the peaks and valleys of the pixels are
smoothed.
halftone screen A tool used in offset printing, typesetting, and laser printing to
convert a continuous tone (such as photographic) image to dots,
which allows the image to be rendered accurately in these
printing processes.
hard disk See fixed disk.
hard values Nonoptimal adjustment of particular FIS fonts in terms of point
size and orientation.
hardcopy Machine output in permanent form, such as printed reports,
listings, and so on. Output in a permanent form (usually on paper
or paper tape) rather than in temporary form, as on a display.
Contains readable printed copy of machine (for example,
computer) output.
hardware Physical components, such as mechanical, magnetic, and
electronic elements of a system, as opposed to programs,
procedures, rules, and associated documentation. Hardware is
operated by software and firmware.
HCF high capacity feeder. Feeder tray capable of holding 2500 sheets
of 20 pound/75 gsm paper. The high capacity feeder trays are
the primary paper supply for the printer. They are located in the
bottom half of the feeder/stacker modules.
HCS high capacity stacker. Stacker bin capable of holding 2500
sheets of 20 pound/75 gsm paper. In the LPS, the high capacity
stacker bins are located in the top half of the feeder/stacker
modules.
header page See banner page
head to head To print the reverse side of a sheet so that the finished document
has a booklet format.
head to toe To print the reverse side of a sheet so that the finished document
has a calendar format.
hexadecimal Numbering system with a base of 16. In this system, 10 through
15 are represented by A through F, respectively.
hierarchy Relative priority assigned to arithmetic or logical operations that
must be performed.