Xerox Nuvera 100, Руководство оператора

Страница: 102 / 234

Maintaining the system
4-4 Operator Guide
Paper curl
Before the manufacturer cuts paper into sheets, it is stored on
large rolls. After it is cut and packaged, it retains some of the curl
from the rollers.
Although it is unnecessary to load paper with the curl facing up
or down, best results occur when you are consistent. For
example, if you open paper with the wrapper seam up, always
load it in the tray that way.
Using consumables
The following tasks are part of maintaining your system:
• Adding fuser agent
• Replacing the dry ink waste container
• Replacing the dry ink cartridge
• Using the custom transfer assist blade
Adding fuser agent
To add fuser agent:
WARNING
Fuser agent contains silicone, which can cause irritation
upon contact with the eyes. Be sure to wash your hands
with soap and water after you finish this procedure.