U N I X P r i n t i n g
5-26
❖
D o c u P r i n t 4 5 1 2 / 4 5 1 2 N N e t w o r k I n t e r f a c e C a r d U s e r G u i d e
5. Another menu appears, select
Add a Remote Queue
.
6. When a window appears, change the values shown to
configure the NIC. The values displayed are default
values. You must replace the short and long form filter
values with the values shown on the next page.
1. After you have supplied all values, press
.
You can now print.
Setting Up an AIX 4.0 System
Use the following procedures to install a NIC in an AIX 4.0
system:
1. Run
SMIT Printer
.
2. Select
Print Spooling
.
3. Select
Add a Print Queue
4. Select
Remote
.
5. Use
Standard Processing
.
6. Assign a queue name.
7. Use the host address of the NIC for the Remote System.
8. Use
PORT1
for the queue on the remote system.
9. Add a description (optional).
Requested Information
Inputted Data
Example
Description of Inputted Data
Name of queue to add
print1
Name of local printer
queue Destination Host
printfast
NIC IP hostname
Short Form Filter
/usr/lpd/bsdshort
Required value
Long Form Filter
/usr/lpd/bsdlong
Required value
Name of remote printer queue
PORT1
NIC
Name of device to add
print1
Name of local queue
Book.frm : CHAP5.FRM Page 26 Saturday, October 12, 1996 7:43 AM
