C o n f i g u r i n g N e t W a r e 4 . 0 x B i n d e r y E m u l a t i o n
3-14
❖
D o c u P r i n t 4 5 1 2 / 4 5 1 2 N N e t w o r k I n t e r f a c e C a r d U s e r G u i d e
5. Search the file to see if you have a statement similar to the
following included:
SET BINDERY CONTEXT=0U=ENG
Where
=0U=ENG
is an example of a name for the file
server context. Use your own file server context in place
of
=0U=ENG
.
6. At the console prompt, type the
SET BINDERY
CONTEXT
statement that you entered in the
autoexec.ncf file.
Configure in
Bindery Mode with
PCONSOLE
Once you confirm the server has Bindery Context, use the
following procedures to configure the NIC.
1. Log into the network as ADMIN.
2. Type
PCONSOLE
and press
. The following screen
appears.
3. When the
Available Options
menu appears, press the
key (for the Bindery Mode).
Note
The command at the console prompt takes effect
immediately. The definition in the file takes effect when the
server is shut down and then restarted.
Available Options
Print Queues
Printers
Print Drivers
Quick Setup
Change Context
Book.frm : Chap3.frm Page 14 Saturday, October 12, 1996 7:43 AM
