N I C M I B D e f i n i t i o n
A p p e n d i x C : N I C M I B D e f i n i t i o n
❖
C-15
STATUS mandatory
DESCRIPTION
"The name of the file server owning this queue."
::= { queueEntry 4}
queueporttype OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the type of port."
::= { queueEntry 5 }
NIC value is "31"
queuestate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the queue is active or not. ACTIVE is returned for active.
INACTIVE is returned for not active. In this context, active indicate that there is a file
in the queue."
::= { queueEntry 6 }
qpriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The NetWare priority assigned to the queue."
::= { queueEntry 7 }
The DPI TCP/IP Group
enabletcp OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies whether or not the TCP/IP protocol is enabled. Changes occur at
the next reset or power cycle. Writable Values are:
enable
disable
or any truncation of these terms, in upper case or lower case. Stored values are:
ENABLED
DISABLED
"
::= { dpitcp 1 }
ipaddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the unit's internet address."
::= { dpitcp 2 }
Default value reported on NIC is no value, indicating that there is no value in NVRAM
subnet OBJECT-TYPE
Book.frm : APPC.FRM Page 15 Saturday, October 12, 1996 7:43 AM
