I n s t a l l a t i o n i n a W i n d o w s E n v i r o n m e n t
C h a p t e r 5 : T C P / I P C o n f i g u r a t i o n
❖
5-15
get this message, check that TCP/IP is enabled on the
status sheet
8. When you get a response that your unit is active, you
should be able to ping and
Telnet
to the NIC.
Setting up IP and lpr Parameters
The NIC provides for a setup connection via the standard
Telnet
port. To be able to make changes to a unit at factory
default settings, you must logon as
sysadm
. The default
password is also
sysadm
(this password can be changed
from the
Telnet
utility). The use of the
Telnet
utility is
described elsewhere.
1.
Telnet
to the NIC (the login and password are both
sysadm
).
2. Turn off the protocols that you are not utilizing (option 3).
3. Setup the subnet mask and default gateway for the NIC if
applicable (option 1).
4. Exit, Save, and Reset the NIC
Setting up lpr on the Workstation
The following procedure is used to set up the lpr spooler on
the Windows NT server.
1. Open
Control Panel
.
2. Go to
Printers
.
3. Choose
Printer Menu
.
4. Choose
Create Printer
.
5. Enter a
printer name
(For example, lprprinter).
6. Select the proper
printer driver
.
7. Enter a description. This is optional.
8. In the
Print To
dialog, choose
Other
.
9. In Print Destinations window,
select lpr port
. This leaves
you with
add lpr compatible printer
window.
Book.frm : CHAP5.FRM Page 15 Saturday, October 12, 1996 7:43 AM
