U s i n g t h e N o v e l l P C O N S O L E U t i l i t y
C h a p t e r 3 : N e t W a r e C o n f i g u r a t i o n
❖
3-35
How to Set Up
Notify
You can specify users or groups of users that are notified if a
problem occurs when a print job is sent to the printer. If the
print server is servicing queues on multiple file servers, you
must set up a NOTIFY list for each file server. To set up
NOTIFY, use the following procedures:
1. Start the PCONSOLE utility.
2. Select
Print Server Information
from the
Available
Options
menu.
3. Select the print server from the menu.
4. Select
Print Server Configuration
from the menu.
5. Select
Notify List for Printer
from the menu.
6. Select the printer from the
Defined Printers
menu.
7. Press the
key at the
File Server/Notify Name/Notify
Type/First/Next
screen. The
Notify Candidates
screen
appears.
8. Select the user or user group from the
Notify Candidates
screen. The
Notify Intervals
screen displays.
9. Set the
First
and
Next
intervals for notifying users about
printer problems. The
First
interval is the number of
seconds the network waits before it notifies users about a
print job problem. The
Next
interval specifies how often
in seconds users are notified. Enter a number for each
interval and press
.
10. Press the
key and save all changes.
11. Press the
key until you see the prompt to exit
PCONSOLE. Select
Yes
and then press
.
Book.frm : Chap3.frm Page 35 Saturday, October 12, 1996 7:43 AM
