Xerox DocuPrint 4050 NPS, Руководство по эксплуатации

Страница: 108 / 248

PRINTER CONTROLLER MESSAGES
48-44 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
SYSTEM COMMUNICATION
FAULT, SEE MESSAGE AT CRT This message displays at the DocuPrint printer. A Show
Status entered at the Printer Controller may not display
any printer messages. This is caused by the printer losing
communication with the Printer Controller and not
reporting any appropriate messages.
***Unspecified error: Job error
opening job to JPM: Submit
Disabled Queueing has been stopped, and the Job Pool Manager is
unable to accept the job.
Document submission failed Start queuing.
***Text is lost because the
maximum edit log size has been
exceeded*** The console window cannot display all the text you
requested. The most current 50,000 bytes are displayed.
***Unspecified error: Job error
promoting document <n>: Not
Found An incorrect job number has been entered when using the
Promote Document command. Enter
List Documents to
identify specific job, then retry the Promote Document
command.
Welcome to Cedar 11.0.7 of <date> This is an informational greeting message posted in the
Printing Activity log window.
X900 - IOT communication fault
(check printer power). The printer has been powered off.
1. Check cabling and connections.
2. Power on the printer.
Press continue This message appears when a task needing operator
attention is required, for example replenishing the paper
tray, replacing a toner waste bottle, clearing a paper jam.
When the DocuPrint controller is processing a very
complex job and the printer has already printed all the
images received, the message “Press continue to resume
printing” may be displayed with the message “Output
caught up with input”. In this instance, do
not press the
Continue button. The printer will cycle up when the
controller finishes processing the next page and sends it to
the printer.
Message Explanation/action