Xerox DocuPrint 4050 NPS, Руководство по эксплуатации

Страница: 53 / 248

PRINTER CONTROLLER MESSAGES
XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE 48-33
H355 Convergence timeout
(black toner patch). A convergence timeout has occurred.
1. Press the Continue button.
2. If problem persists, notify your service representative.
H356 Convergence timeout
(color toner patch). A convergence timeout has occurred.
1. Press the Continue button.
2. If problem persists, notify your service representative.
J021 ADIO self test analog
failure. No action required.
If problem persists, notify your service representative.
J023 ADIO self test input
failure. No action required.
If problem persists, notify your service representative.
J024 ADIO self test output
failure. No action required.
If problem persists, notify your service representative.
J025 HCFR self test input
failure. No action required.
If problem persists, notify your service representative.
J026 HCFR self test output
failure. No action required.
If problem persists, notify your service representative.
J028 MC or Real Time ticks out
of spec. Machine clocks or real time per pitch is out of tolerance.
No action required.
If problem persists, notify your service representative.
Note : The failure may be caused by speed variations of
the main drive or registration transport that will cause mis-
registration of the print, or intermittent MC sensor or
registration finger switch.
J067 Waste roll bias voltage
out of range. No action required.
If problem persists, notify your service representative.
J125 Patches for charge
control are out of range. A charge control error has been detected.
No action required.
If problem persists, notify your service representative.
J144 PHR self test input failure. The PHR board has failed or a PHR input signal line is
shorted to ground.
No action required.
If problem persists, notify your service representative.
J145 PHR self test input failure. There has been a PHR board failure, an off-board problem
in a PHR output device or signal line, or a loss of + 24 V.
No action required.
If problem persists, notify your service representative.
Message Explanation/action