Xerox DocuPrint 4050 NPS, Руководство по эксплуатации

Страница: 84 / 248

PRINTER CONTROLLER MESSAGES
48-20 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
1. Discard purged output.
2. Press the Continue button.
3. If the problem persists, call your service
representative.
F006 XER lost machine clock. There is a CPM, MIR or XER board failure. The XER
machine clock passes through MIR. There may also be a
harness problem between CPM and MIR or MIR and XER.
1. Discard purged output.
2. Press the Continue button.
3. If the problem persists, call you service
representative.
F007 PHR lost machine clock. There is a CPM or PHR board failure or a machine clock
signal between CPM and PHR.
1. Discard purged output.
2. Press the Continue button.
3. If problem persists, notify your service representative.
F008 CDM lost pitch reset. There is a PHR or CDM board failure or a harness problem
between PHR and CDM.
1. Discard purged output.
2. Press the Continue button.
3. If problem persists, notify your service representative.
F009 MIR lost pitch reset. There is a CPM or MIR board failure or a harness problem
between CPM and MIR.
1. Discard purged output.
2. Press the Continue button.
3. If problem persists, notify your service representative.
F010 XER lost pitch reset. There is a CPM, MIR, or XER board failure.
1. Discard purged output.
2. Press the Continue button.
3. If problem persists, notify your service representative.
F011 PHR lost registration
finger signal. There is a registration finger switch and tab problem, a
PHB board failure, or a harness problem between the
registration finger switch and PHR.
1. Discard purged output.
2. Press the Continue button.
3. If problem persists, notify your service representative.
F030 Low fuser pressure after
3 consecutive readings
during a job. The fuser pressure is too low.
1. Discard unfused copy.
2. Press continue.
3. If problem persists, notify your service representative.
Message Explanation/action