Xerox DocuPrint 4050 NPS, Руководство по эксплуатации

Страница: 126 / 248

WINDOWS WORKSTATION MESSAGES
49-18 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
Paper stock width must be from 8.00 inches to 8.50 inches, and
the length must be from 10.00 inches to 14.02 inches.
You specified an invalid paper stock size in the Custom Size dialog.
Source DocuPrint Print Submission software
Action Specify a valid paper stock size in the Custom Size dialog.
Paper stock widths cannot vary by more than 0.5 inches (13
mm).
Paper stocks were specified that differ by more than 0.5 inches (13
millimeters) in width.
Source DocuPrint print driver
Action Make sure that the paper sizes you specify differ by 0.5 inches or
less.
Paper stock widths less than 9.0 inches (229 mm) cannot be
mixed with stock widths greater than 9.0 inches (229 mm).
You specified invalid paper sizes for the main paper stock and the
Special Pages paper stocks. For a single print job, the DocuTech
cannot register paper stock of two different widths. For example, you
cannot select [Tabloid (17.0 x 11.0 in)] for one paper stock and [US
Letter (8.5 x 11.0 in)] for another paper stock.
Source DocuPrint Print Submission software
Action Examine the paper sizes that you specified for both the main paper
stock and the Special Pages paper stock. If you select a paper stock
width less than 9.0 inches (229 mm) for one paper stock, make sure
that your other paper stocks are less than 9.0 inches in width.
Alternatively, if you select a paper stock width greater than 9.0 inches
(229 mm) for one paper stock, make sure that your other paper
stocks are greater than 9.0 inches in width.
Paper stocks wider than 9.0 inches (229 mm) must have a length
between 10.0 inches (254 mm) and 12.5 inches (318 mm) for the
Booklet Maker.
You selected the [Booklet Maker] as the Finishing option in the Setup
dialog, and you are using stocks that are either wider than 9.0 inches
or shorter than 12.5 inches.
Source DocuPrint Print Submission software
Action Perform one of the following steps:
Select a Finishing option other than [Booklet Maker] if you wish to use
the stocks that have been programmed.
Select paper stocks that are less than 9 inches wide and less than
12.5 inches long if you wish to use the [Booklet Maker] as the
Finishing option.