Xerox DocuPrint 3055, Руководство пользователя

Страница: 208 / 240

208
A Appendix
A.5 Installing Additional Memory
In case of the following situations, install additional memory to the printer.
• When [Print Page Mode] is set to [On] on your print driver
Setting [Print Page Mode] to [On] changes the printing method of the printer. When
printing large data, or when the printer is taking too much time to print, set [Print Page
Mode] to [On] and try printing again.
• When the [Out of memory] message appears frequently on the control panel
• When installing the optional PostScript software kit (recommended)
Additional memory may also be required depending on the [Print Mode] setting on the print
driver and the paper size to be printed.
The following table lists the required memory capacity.
Output possible : Most data can be printed. However, some data may not be
printed depending on the type of print data, or the print speed
may decrease when 2-sided printing is performed.
Recommended capacity: Memory capacity recommended by Fuji Xerox.
Values of the required memory capacity also vary depending on the usage environment of
the printer.
Note
• When using long paper, 2-sided printing and the printing in the [High Quality] print mode are not
available.
• For more information about additional memory and how to order it, refer to "A.2 Optional Accessories"
(P. 205).
Print
Mode
Paper Size
1 Sided Print 2 Sided Print
Output
Possible
Recommended
Capacity
Output
Possible
Recommended
Capacity
PCL
print driver
Standard
A5
Standard
(64 MB)
Standard
(64 MB)
Standard
(64 MB)
Standard
(64 MB)
B4
A4
8.5 x 14"
Long paper
(297 x 900 mm)
- -
High
Quality
A5
Standard
(64 MB)
Standard
(64 MB)
Standard
(64 MB)
Standard
(64 MB)
B5
320 MB
(St
256 MB)
320 MB
(St
256 MB)
A4
8.5 x 14"