Xerox DocuPrint 3055 Скачать руководство пользователя

Страница: 37 / 240

2.1 Main Components and Functions

Control Panel

No.

Name

Description

Indicator

In the event of an error, use this to verify the location of the button indicated in
an error message displayed on the LCD display.

LCD display

Displays the status of the printer, menu options, and messages.

Refer to

• "Control Panel Display" (P. 38)

<Menu> button

Pressed to display the menu screen.

<Eject/Set> button

Pressed to confirm the menu option selected on the menu screen. This button
is used also when printing reports/lists.

<Power Saver> button/lamp

Pressed to exit the Power Saver mode. This button/lamp lights when the printer
is the Power Saver mode.

<Cancel Job> button

Pressed to stop printing.

>, <

button

Pressed to advance to the next menu, item, or option.
The <

> button is used also when using the Secure/Sample Print feature.

Note

• Holding down the <

> or <

> button scrolls through menus, items, and

options in a circular fashion. Pressing the <

> and <

> buttons

simultaneously displays the default values.

• To use the Secure/Sample Print feature, the hard disk (optional) must be

installed.

<Online> button

Pressed to switch the printer to offline status. When the printer is offline, the
<Ready> lamp goes off and the printer becomes unable to print. Pressing this
button again switches the printer from offline to online (ready-to-print status).

<Error> lamp

Blinks or lights when an error occurs.

<Ready> lamp

Lights when the printer is ready to print.

Содержание DocuPrint 3055
















































































































































































































































Результаты поиска

Содержание DocuPrint 3055

Отзывы:

Похожие инструкции для DocuPrint 3055

Бренды по названию

Популярные бренды

Xerox DocuPrint 3055, Руководство пользователя

Результаты поиска

Содержание DocuPrint 3055

Отзывы:

Похожие инструкции для DocuPrint 3055

Бренды по названию

Популярные бренды