Xerox DocuPrint 3055 Скачать руководство пользователя страница 113

Страница: 113 / 240

5.2 Setting the Common Menus

113

[Bonjour]

Set whether to use the Multicast DNS feature.

Note

• [Bonjour] appears only when the network expansion card (optional) is installed.

[Ethernet]

Set the settings related to the Ethernet interface.

Network / Port

Bonjour

Port Status

Setting Item

Description

Port Status

Sets whether to enable or disable the Bonjour port at printer start-up.
• [Enable] (default)
• [Disable]

Note

• After changing this setting, reboot the printer.

Network / Port

Ethernet

Setting Item

Description

Ethernet

Sets the communication speed and connector type for the Ethernet interface.
• [Auto] (default)

Automatically detects 100 M (full duplex), 100 M (half duplex), 10 M (full
duplex), or 10 M (half duplex).

• [10M Half Duplex]

Uses 10 M (half duplex).

• [10M Full Duplex]

Uses 10 M (full duplex).

• [100M Half Duplex]

Uses 100 M (half duplex).

• [100M Full Duplex]

Uses 100 M (full duplex).

Note

• After changing this setting, reboot the printer.

Содержание DocuPrint 3055
















































































































































































































































Результаты поиска

Содержание DocuPrint 3055

Отзывы:

Бренды по названию

Популярные бренды

Xerox DocuPrint 3055, Руководство пользователя

Результаты поиска

Содержание DocuPrint 3055

Отзывы:

Бренды по названию

Популярные бренды