Xerox D95 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 460

Xerox D95 Скачать руководство пользователя страница 65

5

Scan

Features for the Scanning device are explained in this section. There are various ways
to scan a job as well as where the scanned output should reside when finished.

Simple Scanning

The simple scanning procedure involves loading documents, selecting features, scanning
the job, and identifying where to store the scanned job.

Simple Scan Procedure

1. Load the documents.
2. From the Services Home window, select the applicable feature.
3. Press Start on the Control Panel. The print job will scan.

Loading Documents

The following two methods are available to load documents:

• Document Feeder: Single Sheet or Multiple Sheets

• Document Glass: Single sheet or Bound book

1. Determine which method you are going to use to load the document.
2. Remove any paper clips and staples before loading a document.
3. Adjust any document guides to match the size of the document loaded.
4. Load the documents face up for the Document Feeder, or place the document face

down on the Document Glass.

Selecting Document Features

1. Place the document in either the Document Feeder or on the Document Glass.

5-1

Xerox

®

D95/D110/D125/D136 Copier/Printer

User Guide

«
...
63
64
65
66
67
...
»

Содержание D95













































































































































































































































































































































































































































































Отзывы:

Нет отзывов