Xerox D95 Скачать руководство пользователя страница 421

Страница: 421 / 460

3. Move the lever 1b to the right and remove the jammed paper.

Note

If paper is torn, check inside the machine and remove it.

4. Move the lever 1b to the original position.

5. Close the finisher left cover completely.

Note

The machine will not operate if the cover is open even slightly.

Paper jams inside the finisher right cover

Paper jams at lever 3b and 3d

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.

1. Make sure that the machine has stopped printing.

24-17

Xerox

D95/D110/D125/D136 Copier/Printer

User Guide

Standard Finisher Plus

Содержание D95













































































































































































































































































































































































































































































Результаты поиска

Содержание D95

Отзывы:

Xerox D95, Руководство пользователя, Страница: 421 / 460

Результаты поиска

Содержание D95

Отзывы: