Xerox D95 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 460

Xerox D95 Скачать руководство пользователя страница 2

©

2013 Xerox Corporation. All rights reserved. Xerox

®

and Xerox and Design

®

are

trademarks of Xerox Corporation in the United States and/or other countries.

FreeFlow

®

, SquareFold

®

, and CentreWare

®

are trademarks of Xerox Corporation in the

United States and/or other countries. Product status, build status, and/or specifications
are subject to change without notice.

Microsoft, Windows, Windows XP, Windows Vista, Internet Explorer, and Word are
registered trademarks of Microsoft Corporation in the United States and/or other
countries.

PANTONE

®

is a registered trademark of Pantone, Inc. ScanFlowStore

®

is a registered

trademark of Nuance Communications, Inc.

Apple

®

, Macintosh

®

, Mac OS

®

, and EtherTalk

™

are trademarks or registered trademarks

of Apple Computer, Inc., registered in the U.S. and other countries. Elements of Apple's
Technical User Documentation used by permission from Apple Computer, Inc.

Adobe, the Adobe logo, Acrobat, the Acrobat logo, Acrobat Reader, Distiller, Adobe PDF
logo, Adobe PDF JobReady, Illustrator, InDesign, and Photoshop are registered trademarks
of Adobe Systems, Inc. PostScript is an Adobe registered trademark used with the Adobe
PostScript Interpreter, the Adobe page description language, and other Adobe products.
This product is not endorsed or sponsored by Adobe Systems, publisher of Adobe
Photoshop.

Fiery

®

and PrintMe

®

are registered trademarks of Electronics For Imaging, Inc. GBC

®

and

AdvancedPunch

™

are trademarks or registered trademarks of General Binding Corporation.

HP, HPGL, HPGL/2, and HP-UX are registered trademarks of Hewlett-Packard Corporation.
Netscape

®

is a registered trademark of Netscape Communications. UNIX

®

is a registered

trademark of the Open Group. Mozilla Firefox

™

is a trademark of Mozilla Foundation.

BR779

«
1
2
3
4
...
»

Содержание D95













































































































































































































































































































































































































































































Отзывы:

Нет отзывов