Xerox D95 Скачать руководство пользователя страница 373

Страница: 373 / 460

012-400

Cause: Staple Waste Container near full

Remedy: Follow the procedures to remove and replace the staple waste container in
the finisher.

012-949

Cause: Punch Waste Container is not attached

Remedy: Check that the punch waste container is installed in the finisher and inserted
correctly.

024-931

Cause: The Staple Waste Container is full or near full

Remedy: Remove the Staple Waste Container and install a new one.

024-932

Cause: The Staple Waste Container is not attached

Remedy: Check that the Staple Waste Container is installed in the finisher and inserted
correctly.

024-943

Cause: The booklet staple cartridge is empty or stapling error occurred.

Remedy: Perform the following:

• Check the staple cartridge and reset correctly.

• If necessary, replace with a new cartridge.

• Resume job.

024-957

Cause: Post-Process Inserter Tray (Tray 8/T1) is empty or out of paper

Remedy: Add paper to the paper tray.

024-974

Cause: When feeding paper from the Post-Process Inserter Tray, the designated paper
size and the actual size of paper in the tray differ.

Remedy: Reset/change the paper or cancel the job.

024-976

Cause: Finisher staple fault

Remedy: Check staples and reset correctly.

024-977

Cause: Finisher staple feeding is not ready.

Remedy: Check staples and reset correctly.

024-978

Cause: Booklet maker finisher staple operation is not ready.

22-45

Xerox

D95/D110/D125/D136 Copier/Printer

User Guide

Standard/Booklet Maker Finisher

Содержание D95













































































































































































































































































































































































































































































Результаты поиска

Содержание D95

Отзывы:

Xerox D95, Руководство пользователя, Страница: 373 / 460

Результаты поиска

Содержание D95

Отзывы: