manualshive.com logo in svg

Xerox D95, Руководство пользователя


Поделиться
Скачать
background image

Causes and Actions

Yes/No

Symptoms

The document glass or the document cover is dirty.

Cause

Yes

Copies are not made at
the desired size
If No, go to next
symptom.

Clean the document glass or the document cover.

Action

If problem is not solved, go to next Cause/Action.

The document is made of highly transparent material
like a transparency.

Cause

Place a white sheet of paper on the document before
copying.

Action

If problem is not solved, go to next Cause/Action.

The document is misaligned.

Cause

Load the document correctly.

Action

If problem is not solved, go to next Cause/Action.

The document guides are in an incorrect position.

Cause

Load the document correctly, and align the document
guides with the edges of the document.

Action

If problem is not solved, go to next Cause/Action.

The document is a non-standard size.

Cause

Enter the document size and then copy.

Action

If problem is not solved, go to next Cause/Action.

The document is folded or bent.

Cause

Straighten and properly reset the document.

Action

Print troubleshooting

This section describes solutions for problems encountered during printing.

1.

Unable to print

2.

The print result was not what was expected

15-41

Xerox

®

 D95/D110/D125/D136 Copier/Printer

User Guide

Problem solving

Содержание D95













































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D95

Brother DCP 385C - Color Inkjet - All-in-One User Manual preview
DCP 385C - Color Inkjet - All-in-One
Бренд: Brother Страницы: 256
Brother DCP 385C - Color Inkjet - All-in-One Service Manual preview
DCP 385C - Color Inkjet - All-in-One
Бренд: Brother Страницы: 529
Xerox CopyCentre C32 Color Quick Reference Manual preview
CopyCentre C32 Color
Бренд: Xerox Страницы: 161

Бренды по названию

Популярные бренды

Загрузить еще бренды