Xerox D95 Скачать руководство пользователя страница 306

Страница: 306 / 460

b) Align the sheets against the back wall of the tray.

4. From the printer’s UI, enter the correct paper information, including size, type, and

weight from the Tray Properties window.

5. Select OK to save the information and close the Tray Properties window.

Removing books from the binder

1. The book stacker tray LED lights indicating that a finished book was delivered to book

stacker tray.

2. Press the button to open the book stacker tray.
3. Remove the book and close the tray.

Using the Perfect Binder

The Perfect Binder can be used in three modes:

• Manual mode: Load the preprinted book block into the Perfect Binder compiler tray

and covers into Tray 9. Program the Perfect Binder settings using the copier/printer
UI and press Start to complete the job.

• Copy mode: Copy the book block and cover. Program the Perfect Binder settings using

the copier/printer UI and press Start to complete the job.

• Print mode: From the user’s computer, the book block and cover are programmed

using the print driver. Information and steps for submitting the job are available
through the print driver help screens.

User Guide

21-14

Perfect Binder (D110/D125/D136 with integrated controller)

Содержание D95













































































































































































































































































































































































































































































Результаты поиска

Содержание D95

Отзывы:

Xerox D95, Руководство пользователя, Страница: 306 / 460

Результаты поиска

Содержание D95

Отзывы: