Xerox D95 Скачать руководство пользователя страница 161

Страница: 161 / 460

4. If instructed to open the inner cover, lift up the lever, and open the inner cover.

Remove the jammed document.

Note

If the document is stuck, do not pull on it forcefully, as this could damage the
document.

5. If the jam is inside of the left cover, remove the jammed document.

6. Close the following open covers until they click into place. Close them in the following

order:

• Inner cover
• Top cover
• Left cover

7. If a document jam cannot be found, slowly raise the document feeder, and if the

document is there, remove it.

15-3

Xerox

D95/D110/D125/D136 Copier/Printer

User Guide

Problem solving

Содержание D95













































































































































































































































































































































































































































































Результаты поиска

Содержание D95

Отзывы:

Xerox D95, Руководство пользователя, Страница: 161 / 460

Результаты поиска

Содержание D95

Отзывы: