Xerox D95 Скачать руководство пользователя страница 342

Страница: 342 / 460

Note

Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.

Paper jams in Tray 8/T1 (Post-Process Inserter)

1. Press the Cover button.

2. Open cover 1e and then remove the jammed paper and all paper loaded in the tray.

Note

If paper is torn, check inside the machine and remove it.

3. Fan the paper you removed, making sure that all four corners are neatly aligned, and

then load them again.

4. Push cover 1e until you hear it click into place.

Note

A message is displayed and the machine does not operate if the cover is open even
slightly.

User Guide

22-14

Standard/Booklet Maker Finisher

Содержание D95













































































































































































































































































































































































































































































Результаты поиска

Содержание D95

Отзывы:

Xerox D95, Руководство пользователя, Страница: 342 / 460

Результаты поиска

Содержание D95

Отзывы: