manualshive.com logo in svg

Xerox D125, Руководство пользователя

Поделиться
Скачать
Xerox D125 Скачать руководство пользователя страница 78

9. Close the front cover completely. The machine will not operate if the front cover is

open even slightly.

Fault codes

Cause and Remedy

Fault code

Cause: Unable to process job template due to insufficient hard disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.

002-770

Cause: Unable to store any documents with 2 Sided Book Copy feature.
Remedy: Check the 2 Sided Book Copy settings.

003-750

Cause: The machine is unable to process size, because the specified document
area is too small.
Remedy: Increase resolution or scan area size.

003-751

Cause: The selected resolution was too large for scanning mixed size originals
using document feeder.
Remedy: Decrease Scan Resolution to 200dpi or less, and rescan.

003-753

Cause: An error occurred in the document scanner.
Remedy: Reprocess the job.

003-754

Cause: An error occurred in the document scanner.
Remedy: Reprocess the job.

003-755

Cause: An incompatible combination of features is specified in the document scan
conditions.
Remedy: Check the selected options.

003-760

Cause: The paper size of the tray selected for auto tray is different from the paper
size of the tray selected for Auto Repeat.
Remedy: Change the paper size for the tray, or change the Paper Type Priority
settings.

003-761

Cause: No document is scanned by Form Overlay.
Remedy: Prepare 2 documents or more.

003-764

Cause: When enlarging/reducing a scanned document to the specified paper size,
the reduction/enlargement ratio value exceeds the allowed range.
Remedy: Take one of the following actions:
Manually enter a reduction/enlargement ratio.
Change the paper size.

003-795

Cause: An error occurred in the document feeder.
Remedy: Power-cycle the machine. Contact the Customer Support Center.

005-275
005-280
005-281
005-282
005-283
005-284

User Guide

10-12

Problem solving

Содержание D125























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды