manualshive.com logo in svg

Xerox D125, Руководство пользователя

Поделиться
Скачать
Xerox D125 Скачать руководство пользователя страница 150

Remedy:  Perform the following:

1.

Open the Interface Module/Interface Cooling Module front door.

2.

Carefully remove all sheets and paper scraps from the jam clearance areas.

3.

Close the front door. Verify the paper used is within the approved paper
specifications.

048-103

Cause:  Paper jam:

• A jam occurred during feeding.

• A jam notification is displayed on the UI.

Remedy:  Perform the following:

1.

Open the Interface Module/Interface Cooling Module front door.

2.

Carefully remove all sheets and paper scraps from the jam clearance areas.

3.

Close the front door. Verify the paper used is within the approved paper
specifications.

048-300

Cause:  The Interface Module/Interface Cooling Module front door is open.

Remedy:  Close the Interface Module/Interface Cooling Module front door.

048-310

Cause:  Interface Module/Interface Cooling Module decurler sensor or belt problem

Remedy:  Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.

048-311

Cause:  Interface Module/Interface Cooling Module decurler sensor or belt problem

Remedy:  Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.

048-312

Cause:  Interface Module/Interface Cooling Module decurler sensor or belt problem

Remedy:  Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.

048-313

Cause:  Interface Module/Interface Cooling Module decurler sensor or belt problem

Remedy:  Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.

048-314

Cause:  Interface Module/Interface Cooling Module decurler sensor or belt problem

User Guide

14-10

Interface Module/Interface Cooling Module

Содержание D125























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды