manualshive.com logo in svg

Xerox D125, Руководство пользователя

Поделиться
Скачать
Xerox D125 Скачать руководство пользователя страница 298

051-900

Cause:  Paper jam

Remedy:  Perform the following:

• Check for any obstructions or paper jams in the Finishing Module and Finishing

Transport paper paths and clear them.

• If necessary, power Off/On the machine, and if necessary, resend/restart your print

job.

• If the fault persists, contact the Customer Support Center.

Third-party DFA fault codes

The following table provides a list of fault codes that indicate that a jam or fault has
occurred in the attached third-party, Document Finishing Architecture (DFA) device.

If an error code appears that is not listed in the table below, or if an error persists after
following the listed solution, then contact your Xerox Customer Support Center.

051-910

Cause:  Either the DFA device is not ready or other fault has occurred with it

Remedy:  Perform the following:

• Refer to any user documentation that came with your DFA device and follow the

instructions to bring the device back online.

• If necessary, power Off/On the machine, and if necessary, resend/restart your print

job.

• If the fault persists, contact the Customer Support Center.

051-911

Cause:  Either the DFA device is not ready or other fault has occurred with it

Remedy:  Perform the following:

• Refer to any user documentation that came with your DFA device and follow the

instructions to bring the device back online.

• If necessary, power Off/On the machine, and if necessary, resend/restart your print

job.

• If the fault persists, contact the Customer Support Center.

051-912

Cause:  The DFA device is either full or out of supplies

Remedy:  Refer to any user documentation that came with your DFA device and follow
the instructions to clear the fault and/or replenish the depleted supplies.

051-913

Cause:  Paper jam in the DFA device

Remedy:  Perform the following:

User Guide

18-42

Standard Finisher Plus

Содержание D125























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды