manualshive.com logo in svg

Xerox D125, Руководство пользователя

Поделиться
Скачать
Xerox D125 Скачать руководство пользователя страница 179

049-972

Cause:  Stacker limit or full sensor fault

Remedy:  Perform the following:

Power Off/On the machine

If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.

• Remove any paper from the stacker cart.

• Close the HCS front door.

049-973

Cause:  HCS falsely detects that the Paper Unload button is pressed.

Remedy:  Perform the following:

Power Off/On the machine

If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.

• Remove any paper from the stacker cart.

• Close the HCS front door.

Specifications

Paper guidelines

• Stacker Tray will accept 55-350 gsm (either coated or uncoated stock) with the

possibility of degraded stock quality and increased jam rate for stocks that are heavier
than 300 gsm.

• Transparencies may be run to either the Top Tray or the Stack Tray. Stack height

should be limited to 100 transparencies.

• Coated paper lighter than 100 gsm may not run as reliably as coated paper heavier

than 100 gsm.

• Non-standard papers longer than 305 mm (12 in.) in the feed direction require 210

mm (8.3 in.) minimum measurement across the feed direction.

• Non-standard papers shorter than 254 mm (10 in.) in the cross-feed direction require

330 mm (13 in.) minimum measurement in the feed direction.

15-25

Xerox

®

 D110/D125/D136 Printer

User Guide

High Capacity Stacker (HCS)

Содержание D125























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды