Xerox D125 Скачать руководство пользователя страница 253

Страница: 253 / 310

013-246

Cause: Jam or communication error with the SquareFold Trimmer Module

Remedy: Perform the following:

Power off/on the machine.

If fault persists, call for service.

013-303

Cause: A top cover is open or a jam/fault occurred with the SquareFold Trimmer Module

Remedy: Perform the following:

Open the Top Left and Right Covers of the SquareFold Trimmer Module.

Carefully remove all sheets and paper scraps from jam clearance areas.

Close the SquareFold Trimmer Module Top Left and Right Covers.

Check the Trimmer Waste Container:

• If full, empty the container and reinsert it in the SquareFold Trimmer Module.

• If the container is partially pulled out, push it completely in.

If necessary, follow any remaining instructions on the machine’s UI.

If fault persists, repeat the previous steps.

If fault persists, power off/on the machine.

If fault persists, call for service.

013-304

Cause: A top cover is open

Remedy: Perform the following:

Open the Top Left and Right Covers of the SquareFold Trimmer Module.

Close the SquareFold Trimmer Module Top Left and Right Covers.

If fault persists, power off/on the machine.

If fault persists, call for service.

013-915

Cause: Jam/fault with the SquareFold Trimmer Module

Remedy: Perform the following:

Open the Top Left and Right Covers of the SquareFold Trimmer Module.

Carefully remove all sheets and paper scraps from jam clearance areas.

Close the SquareFold Trimmer Module Top Left and Right Covers.

Check the Trimmer Waste Container:

• If full, empty the container and reinsert it in the SquareFold Trimmer Module.

• If the container is partially pulled out, push it completely in.

If necessary, follow any remaining instructions on the machine’s UI.

17-23

Xerox

D110/D125/D136 Printer

User Guide

SquareFold Trimmer Module

Содержание D125























































































































































































































































































































Результаты поиска

Содержание D125

Отзывы:

Похожие инструкции для D125

Бренды по названию

Популярные бренды

Xerox D125, Руководство пользователя

Результаты поиска

Содержание D125

Отзывы:

Похожие инструкции для D125

Бренды по названию

Популярные бренды