Xerox D125 Скачать руководство пользователя страница 255

Страница: 255 / 310

013-919

Cause: Jam/fault with the SquareFold Trimmer Module

Remedy: Perform the following:

Open the Top Left and Right Covers of the SquareFold Trimmer Module.

Carefully remove all sheets and paper scraps from jam clearance areas.

Close the SquareFold Trimmer Module Top Left and Right Covers.

Check the Trimmer Waste Container:

• If full, empty the container and reinsert it in the SquareFold Trimmer Module.

• If the container is partially pulled out, push it completely in.

If necessary, follow any remaining instructions on the machine’s UI.

If fault persists, repeat the previous steps; if fault persists after that, call for service.

013-940

Cause: The Trimmer Waste Container is full or has a fault

Remedy: Perform the following:

Pull open the container and empty any trimmer scraps from it.

Reinsert the container into the SquareFold Trimmer Module.

Ensure that the container is fully pushed in, and that the indicator light is not lit.

If fault persists, repeat the previous steps.

If fault persists, power off/on the machine.

If fault persists, call for service.

013-941

Cause: The Trimmer Waste Container is full or has a fault

Remedy: Perform the following:

Pull open the container and empty any trimmer scraps from it.

Reinsert the container into the SquareFold Trimmer Module.

Ensure that the container is fully pushed in, and that the indicator light is not lit.

If fault persists, repeat the previous steps.

If fault persists, power off/on the machine.

If fault persists, call for service.

013-943

Cause: Booklet Tray on the SquareFold Trimmer Module is full

Remedy: Perform the following:

Remove any booklets from the tray.

If fault persists, power off/on the machine.

If fault persists, call for service.

17-25

Xerox

D110/D125/D136 Printer

User Guide

SquareFold Trimmer Module

Содержание D125























































































































































































































































































































Результаты поиска

Содержание D125

Отзывы:

Похожие инструкции для D125

Бренды по названию

Популярные бренды

Xerox D125, Руководство пользователя

Результаты поиска

Содержание D125

Отзывы:

Похожие инструкции для D125

Бренды по названию

Популярные бренды