manualshive.com logo in svg

Xerox D125, Руководство пользователя

Поделиться
Скачать
Xerox D125 Скачать руководство пользователя страница 103

Causes and Actions

Yes/No

Symptoms

The print mode specifies Print Quality.

Cause

Yes

Printing is slow
If No, go to next
symptom.

When printing image data that has image quality
as a priority, such as pictures, the print speed
decreases. Turn off the quality priority in the print
mode.

Action

Causes and Actions

Yes/No

Symptoms

A print driver for another model is in use.

Cause

Yes

The settings specified for
print options do not take
effect
If No, go to next
symptom.

Install the print driver for this model.

Action

If problem is not solved, go to next Cause/Action.

The optional apparatus cannot be attached to the
printer.

Cause

Check the options attached with this printer and
reset the printer configuration.

Action

Image exceeds the printable area of the machine.

Cause

Yes

There is no edge.

Increase the printable area of the machine, or
decrease the document print area.

Action

10-37

Xerox

®

 D110/D125/D136 Printer

User Guide

Problem solving

Содержание D125























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды