manualshive.com logo in svg

Xerox D125, Руководство пользователя

Поделиться
Скачать
Xerox D125 Скачать руководство пользователя страница 116

Fault codes

If a fault causes the copying/printing to stop abnormally or a malfunction occurs in the
copier/printer, then a fault code and/or a message displays on the UI. Refer to the
following table for fault codes and information on how to rectify the problem. If a fault
code displays and it is not described in the following table, or if the problem persists
even after you have tried the recommended solutions, contact the Customer Support
Center.

Tip

If a fault code is displayed, all print data is discarded; this includes any data stored in
the built-in memory of the machine.

Cause and Remedy

Fault code

Cause: Tray 6/7 is empty/out of paper.
Remedy: Add paper to Tray 6/7.

024-955
024-956

Cause: There is a malfunction in Tray 6/7.
Remedy: Check the paper setting of paper trays 6/7 and power-cycle the machine.
If the trays errors are not fixed by performing the relevant remedy, contact the
Customer Support Center. Trays other than 6/7 may be used in the interim.

077-210

Cause: There is a malfunction in Tray 6/7.
Remedy: Check the paper setting of paper trays 6/7 and power-cycle the machine.
If the trays errors are not fixed by performing the relevant remedy, contact the
Customer Support Center. Trays other than 6/7 may be used in the interim.

078-100
078-101
078-102

Cause: There is a malfunction in Tray 6/7.
Remedy: Check the paper setting of paper trays 6/7 and power-cycle the machine.
If the trays errors are not fixed by performing the relevant remedy, contact the
Customer Support Center. Trays other than 6/7 may be used in the interim.

078-210
078-211

User Guide

12-10

High Capacity Feeder (HCF/Trays 6 and 7), 8.5 x 11 in./A4

Содержание D125























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды