Xerox C123 Copycentre Скачать руководство пользователя страница 76

Страница: 76 / 360

4 Fax/Internet Fax

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide

Mixed Size Originals

feature. For more information, refer to

Mixed Size Originals on

page 90

Load documents face up into the
document feeder or face down
on the document glass.

NOTE:

The long fax document scan feature has the following limitations.

•

Only available when using the document feeder.

•

Allows you to scan up to 600 mm (23.62 inches) in length.

•

Not available in the double-sided mode.

NOTE:

In both single-sided and double-sided modes, scanning a document at its

original size or smaller is recommended. An enlarged image may be cut off during
transmission.

2. Select the Features

The features available on the [Basic Features] screen are those used most often.

NOTE:

Only those features relevant to the machine configuration will be available.

Press the <All Services> button
on the control panel.

Select [Fax/Internet Fax] on the
touch screen. Ensure that the
[Basic Features] screen is
displayed.

NOTE:

If the Authentication feature

is enabled, you may be required to
enter the user ID and password (if
one is set up). If you need assistance, contact the Key Operator.

Press the <Clear All> button once on the control panel to cancel any previous
selections.

<Clear All> button

<All Services> button

Содержание C123 Copycentre









































































































































































































































































































































































Результаты поиска

Содержание C123 Copycentre

Отзывы:

Похожие инструкции для C123 Copycentre

Бренды по названию

Популярные бренды

Xerox C123 Copycentre, Руководство пользователя

Результаты поиска

Содержание C123 Copycentre

Отзывы:

Похожие инструкции для C123 Copycentre

Бренды по названию

Популярные бренды