manualshive.com logo in svg

Xerox 3450B - Phaser B/W Laser Printer, Руководство по обслуживанию, Страница: 127 / 180

Поделиться
Скачать
Xerox 3450B - Phaser B/W Laser Printer Скачать руководство пользователя страница 127

8-30

Phaser 3450 Laser Printer Service Manual

Registration Transport Assembly (PL 9.1.9)

1.

Remove the Print Cartridge (page 8-4) and protect it from light.

2.

Remove the Top Cover Assembly (page 8-9).

3.

Disconnect the connector from the Registration Sensor. 

4.

Remove the 4 screws that secure the Registration Transport Assembly to the 
chassis.

5.

Lift up on the latch handle at the front and remove the gear cap (item 1) at the 
right end of the Registration Transport Assembly.

Note

The gear cap is the same color black as the printer frame and can be difficult 
to see. Look at the right end of the Registration Transport Assembly and you 
will see the cap just to the right of the bearing.

s3450-062

1

s3450-063

Содержание 3450B - Phaser B/W Laser Printer





















































































































































































Отзывы:

Нет отзывов