Warning Messages
975-0767-01-01
87
Error Code
Condition
Mode
Action
E07
Fan lock alarm
Battery mode
(inverting)
Check the fan for any obstruction and remove it.
Large debris which may enter through the fan grille may impede
the fan blades from turning. When removing debris, do not
insert your fingers inside the grille. Remove power from the
inverter first before attempting to remove the debris.
E8
to
E10
General error detected
Battery and other
modes
Check the fan for any obstruction and remove it.
If there is no issue with the fan, disconnect the unit from its DC
and AC power sources, then reconnect, and then restart the
unit. Perform
Connecting to the Remote Port on page 58
.
If error detection persists, contact customer service.
For error code
E01
, after the LBCO shutdown delay, the unit will immediately stop inverting.
For error codes
E02
to
E04
, the unit will stop inverting.
Содержание Freedom X 1200
Страница 2: ......
Страница 26: ...This page is intentionally left blank 2...
Страница 82: ...This page is intentionally left blank 2...
Страница 99: ...This page is intentionally left blank 2...