AC/DC and GFCI Panel
975-0767-01-01
21
Item
Description
8
15 A supplementary protector with reset button
provides overload protection for the customer-supplied
GFCI. Press to recover from an overload condition. In a
hard wired installation, the supplementary protector does
not protect output wiring.
9
Remote port
(RJ12) allows you to connect an accessory
remote control device.
10
Captive nut panel screw
holds the wiring compartment
cover in place. See WARNING above.
11
Mounting flanges
on both sides allow you to mount the
inverter permanently on the interior deck or on a wall.
12
Ventilation grille
(openings) must not be obstructed for
the proper operation of the cooling fan and inverter. When
the inverter is mounted, the ventilation grille must not point
up or down.
Cooling fans
turn on when the internal temperature
reaches a set point temperature.
13
DC terminal
opening for routing (–) negative DC cable.
14
DC terminal
opening for routing (+) positive DC cable.
WARNING
ELECTRICAL SHOCK HAZARD
n
Use a torque screwdriver to tighten the bolt on the DC
ground lug to a torque of 23 in-lb (2.6 N-m) of force.
n
Apply an anti-corrosion compound to the copper wire prior
to connecting to the DC ground lug.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
Содержание Freedom X 1200
Страница 2: ......
Страница 26: ...This page is intentionally left blank 2...
Страница 82: ...This page is intentionally left blank 2...
Страница 99: ...This page is intentionally left blank 2...