Product Safety Information
8
Freedom X 1200 Owner's Guide
WARNING
FIRE AND EXPLOSION HAZARD
n
Unit’s components may produce arcs or sparks.
n
Do not install near batteries, in machinery space, or in an
area in which ignition-protected equipment is required.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
Areas include any space containing gasoline-powered machinery,
fuel tanks, as well as joints, fittings, or other connections between
components of the fuel system.
WARNING
ELECTRICAL SHOCK HAZARD
n
Replace the wiring compartment cover before turning on
power to this equipment.
n
Use a torque screwdriver to tighten the captive nut panel
screw to 5 in-lb (0.56 N-m) torque to ensure a proper
ground connection and a required tool access to the wiring
compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
CAUTION
ELECTRICAL SHOCK AND FIRE HAZARD
n
Do not open. No serviceable parts inside. Provided with
integral protection against overloads. Bonding between
conduit connections is not automatic and must be
provided as part of the installation.
n
Read guide before installing or using.
n
Do not cover or obstruct ventilation openings.
n
Do not mount in zero-clearance compartment –
overheating may result.
n
Do not expose to rain or spray. This inverter is designed
for marine applications only when additional drip
protection is installed in certain orientations. See
"Approved Mounting Orientations" on page 36
for more
information.
n
Install GFCIs only as specified in this guide. Other types
may fail to operate.
n
Do not connect AC OUT to any source of power. Damage
to unit may occur.
n
For AC IN and AC OUT, use wires suitable for at least
75°C.
Failure to follow these instructions can result in injury or
equipment damage.
Содержание Freedom X 1200
Страница 2: ......
Страница 26: ...This page is intentionally left blank 2...
Страница 82: ...This page is intentionally left blank 2...
Страница 99: ...This page is intentionally left blank 2...