Xantrex Freedom EX 4000, Руководство по установке

Страница: 7 / 52

Regulatory
975-0998-01-01 5
NOTICE
RISK OF INVERTER/CHARGER/CONVERTER DAMAGE
n
Never allow battery acid to drip on the
inverter/charger/converter when reading specific gravity, or
filling battery.
n
Never place the Freedom EX 4000 unit directly above
batteries; gases from a battery will corrode and damage
the inverter/charger/converter.
n
Do not place a battery on top of the
inverter/charger/converter.
Failure to follow these instructions can result in equipment
damage.
Regulatory
The Freedom EX 4000 inverter/charger/converter is certified to
appropriate US and Canadian standards. For more information
see
Regulatory approvals on page 48 .
The Freedom EX 4000 inverter/charger/converter is intended to
be used for recreational, commercial, or other mobile
applications. This inverter/charger/converter is designed for
marine applications only when additional drip protection is
installed in certain orientations. See the section on Marine
Installation for information.
FCC (EMI) Information to the
User
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC / CAN ICES-003 Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
n
Reorient or relocate the receiving antenna.
n
Increase the separation between the equipment and
receiver.
n
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
n
Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Unauthorized changes or modifications to the equipment could
void the user’s authority to operate the equipment.
End of Life Disposal
The Freedom EX 4000 Inverter/Charger with 48VDC-to-12VDC
Converter is designed with environmental awareness and
sustainability in mind. At the end of its useful life, the Freedom
EX 4000 can be decommissioned and disassembled.
Components which can be recycled must be recycled and those
that cannot be recycled must be disposed of according to local,
regional, or national environmental regulations.
Many of the electrical components used in the Freedom EX
4000 Inverter/Charger with 48VDC-to-12VDC Converter are
made of recyclable material like steel, copper, aluminum, and
other alloys. These materials can be auctioned off to traditional
scrap metal recycling companies who resell reusable scraps.
Electronic equipment such as the circuit boards, connectors,
and fuses can be broken down and recycled by specialized
recycling companies whose goal is to avoid having these
components end up in the landfill.
For more information on disposal, contact Xantrex.