Xantrex Freedom EX 4000, Руководство по установке

Страница: 12 / 52

Installation Tools and Materials
10 Freedom EX 4000 Installation Guide
Installation Tools and Materials
You will need the following to install the Freedom EX 4000:
n
Wire/cable stripper
n
½" screws or bolts for mounting vertically
n
#2 Phillips torque screwdriver
n
Torque wrench for DC terminals (½" or 13mm socket
wrench)
n
AC cable (that is, three-conductor-plus-ground cable),
sized appropriately for load and application
n
½" (or ¾") trade-size bushings (supplied)
n
ferrite cores (supplied)
n
½" (or ¾") trade-size strain relief device (optional)
n
Wire nuts or crimp connectors for AC wire and appropriate
tools and also if installing the 20-pin harness (PN: 808-
0820, sold separately)
n
DC cable, sized appropriately for battery and load (more
on page 1 )
n
Lugs for DC cables to fit
5
/
16
" DC stud terminals as well as
appropriate tools (like a crimping tool)
n
AC and DC disconnects and over-current protective
devices, as appropriate
n
Drip shields (not supplied) for Marine installations. See
Drip Shield Installation on page 44 .
Basic Installation Procedures
This section provides sample installation information as a guide
for your installation. For your convenience, the overall procedure
is divided into these main steps:
Step 1: Designing the Installation 11
Step 2: Choosing a Location for the Unit 16
Step 3: Mounting the Unit 16
Step 4: Connecting the AC Input Wires 18
Step 5: Connecting AC Output to an Existing AC Circuit 21
Step 6: Connecting the DC Cables 31
Step 7: Connecting to Port(s) on the Freedom EX 4000 37
Step 8: Battery Configuration 41
Step 9: Testing Your Installation 41
NOTE : For marine applications, see additional installation
instructions on page 43 .